{"id":11112,"date":"2012-03-27T16:00:25","date_gmt":"2012-03-27T16:00:25","guid":{"rendered":"http:\/\/d45h139.public.uconn.edu\/sites\/news\/?p=11112"},"modified":"2025-01-30T23:54:23","modified_gmt":"2025-01-31T04:54:23","slug":"cmbe-professors-investigate-nano-devices-for-explosive-detection","status":"publish","type":"post","link":"https:\/\/today.uconn.edu\/2012\/03\/cmbe-professors-investigate-nano-devices-for-explosive-detection\/","title":{"rendered":"CMBE Professors Investigate Nano-Devices for Explosive Detection"},"content":{"rendered":"

By John C. Giardina<\/p>\n

\"\"Two faculty members in the Department of Chemical, Materials, & Biomolecular Engineering have begun a project that has the promise to transform the work and protect the lives of military and law enforcement personnel around the world. \u00a0Associate Professors Brian Willis and Yong Wang, working on a grant funded by the Office of Naval Research, are attempting to develop an electronic chemical sensing device that can identify the presence of explosives by sampling the vapor around an object.<\/p>\n

Improvised explosive devices (IEDs), regularly used in terrorist attacks around the world, present a persistent threat to the people who are tasked to investigate these devices and to the public at large.\u00a0 Because IEDs are often hidden or disguised, they are hard to identify without some kind of sensing technology.\u00a0 \u201cSoldiers rely mostly on their intuition to identify and disarm IEDs,\u201d Dr. Willis says.\u00a0 \u201cThere is no ubiquitous sensor that can tell whether a suspicious object is an explosive or not.\u201d\u00a0 Thus, the goal of Drs. Willis and Wang is to develop a device that is sensitive and selective: able to detect specific chemicals that are present at only miniscule amounts in the air.<\/p>\n

To do this, the researchers employ a type of molecule called an aptamer, which is a short strand of either DNA or RNA.\u00a0 Specific aptamers, defined by their nucleotide sequence, will often bind to a specific chemical, like those found in explosives.\u00a0 The challenges Drs. Willis and Wang face are to, first, identify specific aptamers and their respective chemical targets, and then design a system where the binding of chemical to aptamer can be detected.<\/p>\n

\"\"<\/a>Dr. Wang\u2019s work focuses on the identification of the specific aptamers.\u00a0 \u201cMy side of the project focuses on the identification, amplification, and modification of aptamers,\u201d he says.\u00a0 To do this, Dr. Wang starts with a library of billions of different aptamers.\u00a0 He runs a target chemical through the aptamers and isolates the ones that bind to it.\u00a0 He then amplifies the isolated aptamers and runs the process again.\u00a0 Repeating these steps multiple times, Dr. Wang is able to isolate aptamers that have a high affinity for specific target molecules.\u00a0 At that point, Dr. Wang has to modify the aptamer.\u00a0 \u201cWhenever the chemical binds to the aptamer, the conformation, or shape, of the aptamer changes,\u201d he says.\u00a0 If the aptamers can be designed to change shape in a certain way, the binding of the chemical can be detected more easily.<\/p>\n

Now, Dr. Willis\u2019 work comes into play.\u00a0 He is working on designing molecular scale electronic devices that will detect the conformation changes.\u00a0 His research focuses on using electron tunneling devices to electronically detect the target chemical.\u00a0 Electron tunneling is essentially the flow of electrons through a gap between two wires.\u00a0 Normally, one would expect that electrons could not flow through\"\" two wires that were not touching, but if they are close enough, on a nano-scale, then the two wires will act like a completed circuit.\u00a0 As it turns out, the flow of electrons is strongly affected by what is between the wires.\u00a0 So, if an aptamer is placed between the two contacts, it will change the electrical current.\u00a0 Moreover, any conformation changes will alter the electrical current as well. \u00a0Because these circuits are so small, a sensing device could have millions of them, with groups of the circuits dedicated to different aptamers.\u00a0 To use the device, air would be flowed past the circuits.\u00a0 If any of the target molecules are present in the air, they will bind to their specific aptamer, changing the conformation.\u00a0 The current running through the circuit attached to the aptamer will then change as well, giving an electrical signal for the presence of the specific chemical in the air.<\/p>\n

This project has the capability to make explosives detection much faster, more accurate, and safer than it is now.\u00a0 The benefit of such a sensor, though, goes beyond military and law enforcement applications.\u00a0 Dr. Willis says, \u201cOne can think of lots of other applications for chemical sensors, commercial applications, in the future as well.\u201d\u00a0 It is not hard to imagine the benefits in many areas of life that can be derived from immediate and accurate chemical detection.<\/p>\n","protected":false},"excerpt":{"rendered":"

Two faculty members in the Department of Chemical, Materials & Biomolecular Engineering have begun a project that has the promise to transform the work and protect the lives of military and law enforcement personnel around the world. Associate professors Brian Willis and Yong Wang, working on a grant funded by the Office of Naval Research, are attempting to develop an electronic chemical sensing device that can identify the presence of explosives by sampling the vapor around an object.<\/p>\n","protected":false},"author":122,"featured_media":224921,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_crdt_document":"","wds_primary_category":0,"wds_primary_series":0,"wds_primary_attribution":0,"footnotes":""},"categories":[1866],"tags":[],"magazine-issues":[],"coauthors":[44],"class_list":["post-11112","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-engr"],"pp_statuses_selecting_workflow":false,"pp_workflow_action":"current","pp_status_selection":"publish","acf":[],"publishpress_future_action":{"enabled":false,"date":"2026-05-11 12:10:44","action":"change-status","newStatus":"draft","terms":[],"taxonomy":"category","extraData":[]},"publishpress_future_workflow_manual_trigger":{"enabledWorkflows":[]},"_links":{"self":[{"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/posts\/11112","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/users\/122"}],"replies":[{"embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/comments?post=11112"}],"version-history":[{"count":1,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/posts\/11112\/revisions"}],"predecessor-version":[{"id":224922,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/posts\/11112\/revisions\/224922"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/media\/224921"}],"wp:attachment":[{"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/media?parent=11112"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/categories?post=11112"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/tags?post=11112"},{"taxonomy":"magazine-issue","embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/magazine-issues?post=11112"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/today.uconn.edu\/wp-rest\/wp\/v2\/coauthors?post=11112"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}